Looking for a guide on how to Enable DHCP (Dynamic Host Configuration Protocol) for Online Access? Have a look at our video to streamline your network management process!

This video is a step by step guide on how to enable DHCP. The steps are also below:

  1. Open the Dahua Toolbox and run the Config Tool. These settings can also be set locally on any recorder if not using the Config Tool
  2. Select the Recorder you wish to work on and click “Web” to open the Web Portal on Edge
  3. Login with your Username and Password
  4. Navigate to the Network Menu
  5. Open the TCP/IP Menu
  6. Click the Pencil Icon to Edit your NIC Settings
  7. Click DHCP to Enable it. Then click OK
  8. If DHCP is enabled on this screen, uncheck this box. Make sure you click Apply to save these settings

Looking for Connection to the DMSS App? Follow these steps below:

  1. For Connection to the DMSS App, click the P2P Tab
  2. Click the Enable Slider and click Apply on the bottom right
  3. Scan the QR Code marked “Mobile Client” with your phones camera for a link to download the DMSS App
  4. Scan the QR Code marked “Device SN” on the DMSS App when adding the device to your app for remote viewing
  5. Click Apply and Reboot the Recorder
  6. Navigate back to the P2P Menu when the Recorder has rebooted, to check its status is now Online

To view more blog post from Videplus, please click here.