en EN

Long Range PoE Extender

Long Range PoE Extender


Long Range PoE Extender available at Videplus. We are a CCTV distributor based in Belfast, county Antrim and cover all of the UK and Ireland. We pride ourselves in keeping up to date in advances of technology. We stock long range PoE network switches which have  CCTV mode which allows you to go distances of up to 300mtrs. These switches are available in 4, 8, 16 and 24 ports. We also have PoE extenders that extend 100mtrs and you can install a maximum of 3 of these units on one run giving you a total distance of 400mtrs. Then we have our ultimate weapon where you can get ethernet over any 2 cores of distances up to 1000mtrs yes 1000mtrs and you can get this with or without PoE. Give our sales team a call on 028 9032 9480 if you wish to find out anymore information.

Long Range PoE Extender

The 8 ports PoE Ethernet Switch with 8 downlink PoE ports and double 1000Mbps uplink ports is a security
surveillance Ethernet Switch which is applicated in high definition network surveillance and security
system. The product fully combines the characteristics of security surveillance, provides fast packet
forwarding rate and up to 7G backplane bandwidth, which ensures clear image and fluent video
transmission. Besides, the 8 downlink PoE ports support IEEE802.3af/at standard, and the double
1000Mbps uplink ports are reliable assurance for connection between the surveillance system and
external network connection. The ESD, 6KV lightning protection and surge protection circuits improve
product stability. Also the device supports one key CCTV mode which realizes VLAN function, restrains the
network storm, protects the information security, prevents the virus spread and cyber attack, fully satisfies
the Ethernet video security surveillance system and Ethernet projects needs.



PoE Repeater

The PoE Ethernet extender can transmit Ethernet signal and power through one single
network cable, which solve the transmission distance limitation of devices as for network
camera and so on. The product supports IEEE802.3u 100Base-TX and IEEE802.3 af/at
standards. The Max power consumption transmission can up to 30 watts, which can supply
25.4 watts power consumption for terminal devices. The product can extend to 100M and
thus the cascading distance can up to 400m after be cascaded for several times. And it can
support 100Mbps full duplex transmission mode with good protection ability of anti-ESD
and anti-surge. The special design of built-in splicing slot on both sides and magnetic
attraction as well as hanger on the bottom enables multiple installation methods of wall
mounting, splicing and adsorption. Above all, the product can give a better systematic
solution of transmission distance and power supplying for network camera and other device.



Ethernet Over Any 2 Cores

Ethernet Extender allows 10/100 BaseT Ethernet to be transmitted over any 2-wire copper cables. This device is often used in legacy installations where existing wire is re-used as part of an upgrade to IP devices. This device contains the Master unit and Slave unit, which supports point to point and point to multi-point network transmission. Now this device has been widely used for network extension system, network security, network information publishing system, network renovation and expansion systems, railway, urban traffic, mining and telecommunication, etc.