en EN
JAR-PI60 1000Mpbs 60W PoE

JAR-PI60 1000Mpbs 60W PoE Injector


Product Description

JAR-PI60 1000Mpbs 60W PoE Injector

Ultra PoE (60W), perfect for singular standalone devices or where you only have a network switch for data connectivity but require power to a device, injectors enable you to ‘inject’ power into the cable to the device up to 100m away, ideal where there isn’t any local DC power available. Specs include:

  • 2 x 1000Mbps RJ45 Ports with 1 PoE
  • IEEE 802.3af/at/bt compliant
  • Delivers power up to 100 meters
  • Auto-determine the necessary power requirements
  • Plug-and-Play, requires no configuration
  • AC power via figure 8 kettle lead

Power over Ethernet (PoE) injectors are devices used to transmit both power and data over a single Ethernet cable to network devices such as IP cameras, VoIP phones, wireless access points, and other compatible devices.  PoE injectors are particularly useful in situations where it’s impractical or costly to run separate power lines to each network device.  Using a PoE Injector can simplify installation and reduce clutter by eliminating the need for additional power adapters and cables.

JAR-PI60 1000Mpbs 60W PoE Injector – How it works:

  1. Power Source: The PoE injector is typically connected to a power outlet or power source.
  2. Ethernet Connection: One end of the PoE injector is connected to a network switch or router via an Ethernet cable.
  3. Device Connection: The other end of the PoE injector is connected to the device that needs power and data transmission (e.g., IP camera, wireless access point) via another Ethernet cable.
  4. Power and Data Transmission: The PoE injector injects electrical power into the Ethernet cable along with the data signal. This allows the connected device to receive both power and data through the same cable.


There are no reviews yet.

Be the first to review “JAR-PI60 1000Mpbs 60W PoE Injector”

This site uses Akismet to reduce spam. Learn how your comment data is processed.