- Power – Battery: Two CR2 batteries, Power supply voltage: 3 V, Battery life — up to 4 years, Backup power supply: battery CR2032
- Install – Internal
- Anti Sabotage – Protection against fraud, Jamming detection, Tamper-resistant
- Compatibility – Operates independently or with Hub, Hub Plus, Hub 2, ReX, ocBridge Plus, uartBridge
- Dimensions – 132 х 132 × 31 mm
Wireless fire detector with temperature and carbon oxide sensors that monitors security in the room twenty four hours a day and immediately notifies of dangerous CO levels, smoke and sharp jumps in temperature.
Authentication to prevent forgery
Jamming detection and communication channels encryption
The device registers smoke, sharp jumps in temperature, and dangerous CO levels
It can operate independently from Ajax Hub, notifying of danger by means of a built-in siren
The device independently tests the smoke chamber and gives prompt notification of the need to dust
Principle of operation
The device detects smoke by means of a camera with a photoelectric sensor. An additional chemical element detects carbon oxide and raises the alarm.
It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.