AJ-MCO-W Ajax Motion Cam Outdoor

    AJ-MCO-W Ajax Motion Cam Outdoor


    Product Description

    AJ-MCO-W Ajax Motion Cam Outdoor

    Quick Spec:

    • Power – 4 × CR123A batteries
    • Install – Indoors/Outdoors
    • Compatibility – Operates only with Hub 2
    • Dimensions – 206 × 108 × 93 mm
    • Hub2 required for visual notifications

    AJ-MCO-W MotionCam Outdoor

    Wireless outdoor motion detector with a photo camera to verify alarms

    Lightning-fast alarms. Verified.

    The AJ-MCO-W MotionCam Outdoor recognizes intrusion from the very first steps on the territory and confirms it with an animated series of photos. Visual verification helps to instantly ascertain the situation, saving users from concerns, and security companies from unnecessary patrol dispatches.

    Intelligent false alarm filter

    AJ-MCO-W MotionCam Outdoor is equipped with two independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm. When both sensors detect motion, LISA performs correlation and spectral analysis of the signals, which helps to instantly distinguish real threats from interferences.

    Correlation analysis

    Whenever MotionСamOutdoor detects motion, LISA analyses and compares signal forms from two sensors in real-time. If forms are similar, the alarm is activated.

    Multilevel anti-sabotage protection

    Can’t unnoticeably disable the MotionCam Outdoor. Detector has masking sensors that react to hindering, covering and painting the lens.

    It will take the hub less than a minute to detect the loss of communication with the detector and inform a central monitoring station and users about the problem. MotionCam Outdoor will instantly become known if dismantled.


    Uncompromising communication reliability

    MotionCam Outdoor uses two secure radio protocols simultaneously: Jeweler and Wings. Radio protocols work independently of each other and each is focused on its own function. Jeweler transmits alarms in 0.15 seconds, and thanks to Wings, the first shot from the site will be in the app in less than 9 seconds.  The radio signal range is sufficient to install the detector where it will be most effective. And up to 3 years of battery life minimizes maintenance efforts.

    Less manual labor. More settings in the app.

    The process of connecting and configuring MotionCam Outdoor saves installation engineers time in the best possible way. To add a detector to the system, all you have to do is scan the QR code with the Ajax app, assign a name and a room to it. Configure the device in the app in real time,test detection zones and communication. If necessary, remotely reconfigure system parameters or disable detector,without visiting the site.