CAMECT-RELAY-4-4, a 4 input 4 output relay module that’s designed to work with all Camect hubs. Operating from a 5v 3amp supply, configured via a simple interface via an ethernet connection.
The universal 4 input and 4 output relay module is a simple device to control up to 4 relays from your Camect device and accept 4 inputs from 3rd party devices to trigger alerts and also set and unset Camect.
pre-installed Camect firmware allows connection to Camect devices. Control loads from 3v and up to 240v and 4 amp, allowing lights, audio warnings and other devices to be automatically controlled from Camect AI detections.
4 output status LED’s, wired NO/NC. Each has pluggable connectors 26-16 awg wires.
Minimum 105 cycles at 1,800 operations per hour (full load)
Minimum 107 cycles at 18,000 operations per hour (no load)
Input voltage for power: USB-C 5v or 5v DC input via 2 pin terminal
Current Draw: Max 3amp
Relay Voltage: 3v to 240v AC or 3v to 24v DC (4amp)
Input Voltage: 3v to 24v AC or DC
Size in mm: L93 x W80 x H60
Weight in grams: 260
Relay Time options: 3 second to 5 minutes (Resets with new event)
Active connection 1: Ethernet DHCP
connection 2: HDMI (Diagnostics only)
Active connection 3: Red LED for power on
connection 4: Green LED for booting cycle only
