FIK-204-0001 Twinflex Multipoint ASD Detector with Sounder.
A multifunction smoke and heat detector with three smoke detection modes, three heat detection modes and one combination mode. Built in ‘End of Line’. Set these options using the DIL switch. Supplied complete with mounting base and dust cover.
Complete with inbuilt sounder featuring three sound patterns and two volume levels.
The Twinflex Multipoint ASD is a plug-in type smoke detector that utilises a photo-electric sensing chamber to make a measurement corresponding to smoke density. The device also incorporates a thermistor sensing circuit to allow for accurate heat measurement. These elements allow the device to be configured to a smoke, heat or combined setting. This device is only compatible with the Twinflex control panels (and their associated detection and alarm equipment)
Install the detector according to the control panel installation manual. The installation must also meet the requirements of any local authority.
Fike recommends spacing detectors in accordance with any local authority. Due to the effects of IR and possible magnetic interference, detectors should not be fitted any closer than 500mm (preferably 1000mm) to a light fitting or any other source of IR or EMI.
Additionally, mount the device so that the indication LED faces towards the light fitting. For more specific information regarding detector spacing, placement and special applications please refer to local authority.
**Note: As with other optical detectors, this device should not be located where subjected to high levels or pulses of light or infra red light, as this may cause false alarms or faults.**
