FIK-205-0003-NB Sita ASD Detector.
A multifunction smoke and heat detector with three smoke detection modes and three heat detection modes. Inbuilt short circuit isolator. These options are set by PC or control panel depending on the system type. Supplied complete with dust cover.
The Multipoint ASD is a plug-in type smoke detector that utilises a photo-electric sensing chamber to make a measurement corresponding to smoke density. The device also incorporates a thermistor sensing circuit to allow for accurate heat measurement. These elements configure the device to a smoke, heat, or combined setting. Digital communication technology to the control panel ensures accurate data transfer at high transmission speeds.
Install the detector in accordance with the control panel installation manual. The installation must also meet the requirements of any local authority.
Fike recommends spacing detectors in accordance with any local authority. Due to the effects of IR and possible magnetic interference, install detectors no closer than 500mm (preferably 1000mm) to a light fitting or any other source of IR or EMI. Additionally, mount the device with the indication LED facing the light source.
The ASD detector incorporates a tamper resistant locking mechanism that prevents its removal from the base without the use of a special tool. To remove the device, attach the tool over the detector and turn it anti-clockwise to release the detector from the base.
