FIK-326-0015-R Sita Strobe – Weatherproof
LED visual indication beacon (strobe) with inbuilt short circuit isolator. Supplied complete with red mounting base and red lens. **Note: This item does not include a sounder**
The Sita Strobe unit allows for visual indication when the system enters an alarm condition. This is an addressable unit that attaches to the loop. Digital communication technology to the control panel is implemented allowing for accurate data transfer at high transmission speeds. This device is only compatible with the Sita 200+, Duonet and Quadnet ranges of control panels.
The Strobe must be installed in compliance with the control panel installation manual. The installation must also meet the requirements of any local authority. Install the device in compliance with BS 5839 Pt1: 2002 + A2: 2008 for maximum performance. Fike recommends spacing of strobes in accordance with BS 5839.
Fit the wall-mount bracket to rear of the base as shown. Wire this product using the provided cable glands. Any other installation method will compromise sealing integrity. Mount the device so that cable entry is from the underside of the unit.
Drill the cable entry region(s) in the base moulding as required using a 20mm diameter drill. Remove all burrs from the drilled holes and ensure the adjacent surfaces are smooth and flat. Affix the wall-mounting unit in the desired location with 2 screws. Install all wiring according to the recommendations.
