FIK-326-0021-R Sita Sounder and Strobe – Low Profile. A sounder and LED visual indication beacon (strobe) with 88dB output, three sound patterns and inbuilt short circuit isolator. Supplied complete with red mounting base and red lens.
The Sita Sounder/Strobe unit allows for audible and visual indication when the system enters an alarm condition. This is an addressable unit that attaches to the loop. Implement digital communication technology to the control panel to allow for accurate data transfer at high transmission speeds. This device is only compatible with the Sita 200+, Duonet and Quadnet ranges of control panels.
The Sounder/Strobe must be installed in compliance with the control panel installation manual. The installation must also meet the requirements of any local authority. Install the device in compliance with BS 5839 Pt1: 2002 + A2: 2008 for maximum performance. Fike recommends spacing of sounders/strobes in accordance with BS 5839. For more specific information regarding sounder spacing, placement and special applications please refer to BS 5839 Pt1 : 2002 + A2 : 2008.
The base moulding should be positioned so that access to the locking feature is concealed from general view to lessen the possibility of unauthorised removal of the device. Drill or break out the cable entry region(s) in the base moulding as required. Drill out the desired mounting holes through hole / slot guides as required. Affix the base moulding to a flat surface using a minimum of 2 screws.
Install all wiring according to the recommendations in BS 5839 and any special instructions in the control panel installation manual. Use 2-core, 1.5mm² screened, fire-resistant cabling with the following characteristics:
Max Capacitance Core to Screen: 180pF / m
Max Capacitance Core to Core: 100pF / m
Inductance (Max): 1.0mH / km
Max Resistance Two Core Screened 1.5mm²: 12.1Ω / km
