FIK-505-0010 TwinflexPro2 Repeater Panel. The repeater will only work with the 4 & 8 Zone Twinflex Pro2 panels using version 2.0 software onwards.
The TWINFLEXpro² system is an intelligent ‘2-wire’ system utilising a conventional type cabling format. The system is classed as ‘Analogue non-addressable’ due to the architecture used within the design. All field devices including sounders can be connected to the zone via a common 2-core screened cable. The devices communicate with the control panel using the ‘TWINFLEX®’ data protocol
The TWINFLEXpro² repeater panel is smaller than the TWINFLEXpro² control panel. It does not itself connect to or control detection devices. Instead, it connects to a control panel and reports events which occur on the control panel. It can also perform system controls over the network (i.e. Silence Alarms, Reset, Sound Alarms & Silence Buzzer). Connect a maximum of 8 repeater panels to a single control panel.
Dimensions (mm): 250 x 140 x 85
Weight: 650 grams
Construction: UL94-V0 rated ABS
Cable Entry: 6 x 20mm knockouts, 4 x double 20mm knockouts
Cable type: 2 core 1.5mm2 screened fire rated cable
Operating voltage: Nominal 24V DC (Range 21 – 32V DC)
Operating current Quiescent @ 24V DC: 16 mA (back light off)
Max Operating current @ 24V DC: 50 mA (controls enabled, back light on)
Communications: Multi-drop RS-485
Total peripheral bus length: 500m (max)
IP rating: 20
Maximum number of repeaters per control panel: 8
Operating temperature: 5°C to 50°C
