FIK-520-0001 CIE-A-200. A single loop addressable panel capable of supporting up to 200* devices with a maximum loop length of 2km. Requires 2 x 7Ah 12V Sealed Lead Acid batteries (2 x 12Ah with extended battery box).
The panel also provides two configurable monitored input circuits, 2 configurable monitored output circuits, 2 configurable + 1 fault relay and also a Peripheral bus circuit to add up to 8 repeater panels.
The system may be configured utilising 3 alarm stages with full ‘Zone to Zone’ Cause and Effect across all 32 panel zones with provision to include alarm confirmation and delay timers. An additional 32 output zones are also provided for more complex Cause and Effect programming.
FIK-520-0001 is compatible with Fike’s addressable range of devices and utilizes soft addressing principles eliminating the need for the installer to physically address each device whilst also eradicating time spent on faults caused by duplicate addressing. The operating parameters of the devices are configured either from the panel or via the OSP programming software. Then stored within the Flash memory of the device itself. This enhanced digital protocol means the detector and the host control panel need to send less information between them. Resulting in faster, more reliable communication.
Dimensions Panel (WxHxD): 353mm x 333mm x 117mm
Operating Temperature: +5°C to +40°C
IP Rating: IP30
Mains Supply Input: 230V AC Nominal
Standby Battery Requirement: 2 x 7Ah 12V Sealed Lead Acid (2 x 12 Ah with extended battery box)
Max Number of Loops: 1
Loop Length (max): 2000 Metres
Max Conductor Resistance: 24 Ohms
Loop Loading: 450 DLU (200 Devices Max)*
Loop Operating Voltage: 40V DC
Standby: 24V DC
Max Loop Current: 500mA
Number of Supported Zones: 32
LCD Display: LCD Graphical Display
Device Labels: 31 Characters
Event Log: 1000 Events
Repeater Panels: 8 Max
