FIK-604-0008 TwinflexPro2 8 Zone Kit. The kit contains the following:
The TwinflexPro² panel is an intelligent 2-wire panel that utilises a conventional type cabling format. The system is classed as Analogue non- addressable due to the architecture used within the design. The devices communicate with the control panel using the Twinflex data protocol. The TwinflexPro² panel is available in 2,4 & 8 zone variants which support up to 32 Twinflex devices per circuit.
The TwinflexPro² is able to recognise and separately identify between smoke detector, heat detector and a manual call point alarm. The panel also monitors each zone for detector head removal, device fault, End of line fault and open or short circuit fault. The panel provides two monitored outputs that may be configured as conventional sounder circuits, a volt free common fire relay and a volt free common fault relay.
There are also two multifunction latching/non-latching inputs and one monitored input programmable with options such as Class-Change and Remote fire. The control panel also incorporates an integral power supply unit and requires 2 x 12V 3.3Ah batteries .
Dimensions (mm): 331 x 331 x 99
Weight (excluding batteries): 2.36 kg
Construction: V0 rated ABS
IP Rating: IP 30
Cable Entry: 13 x 20mm knockouts 1 x 50mm x 50mm pull out tab
Cable type: 2 core 1.5mm2 screened fire rated cable, 500m (max per zone)
Detection zones: 8 Max
Devices per zone: Up to 32 Devices dependant on Device Loading Units (DLUs) not exceeding the stated maximum loading
Device Protocol: TWINFLEX® V3 + TWINFLEX®pro
Monitored sounder circuits: Up to 2 (200 mA)
Monitored relay circuits: Up to 2 (200 mA)
Relays on board: Common fire and common fault
Operating standard: BS EN54-2 & 4
Operating temperature: 5OC to 40OC
Mains Supply Range: 230VAC, +10%, -15%, 50/60Hz
Event Log: 500 Events
Zone Labels: 12 Characters
