4 Channel Analogue CCTV Mule
The CCTV Mule makes it easy to add extra cameras to existing installations, you save installation time and reduce the cost of buying and installing more cable.
The Mules work in pairs. One Mule combines the video signals to transmit them down a single co-ax, the other Mule then reconstructs the individual video signals at the remote end. A low cost, easy solution that offers huge installation benefits and opportunities to add extra cameras.
The clever electronics of the CCTV Mule also allow it to carry audio and RS485 data along the same co-axial cable. You can even carry three video signals in one direction and a fourth signal in the other direction!
The CCTV Mules need a 12V power supply at both ends but other than that, it’s a really simple device to use, with no real configuration to do.
There are five modes:
1: 4 video signals down 1 co-ax cable.
2: 3 video signals in one direction, 1 RS485 signal in the opposite direction.
3: 3 video signal in one direction, 1 video signal in the opposite direction.
4: 3 video signal in one direction and 1 audio signal.
5: 3 video signal in one direction and 1audio signal in the opposite direction
Sold as a pair. Compatible with analogue only.
|Cable Type||RG59 or Better|
|Current Consumption||200mA – TX, 350mA – RX|
|Gain||Control for Different Cable Leng|
|Input Connection||BNC Socket|
|No of Inputs||4 – TX, 1 – RX|
|Type of Input||Video|
|Output Connection||BNC Socket|
|No of Outputs||1 – Tx, 4 – Rx|
|Type of Output||Video|
|Video Quality||D1@25FPS – Every Camera|
|Dimensions||(W)175mm x (D)110mm x (H)30mm|