Fike Fire Products
At Videplus, we proudly offer a wide range of Fike Fire Products, known for their cutting-edge technology and reliability in fire detection and systems. Whether you’re looking for an intelligent system for a large facility or a cost-effective solution for smaller buildings, Fike provides robust options to ensure maximum safety and compliance.
Fike Twinflex: Flexible and Cost-Effective Fire Detection
The Fike Twinflex is a versatile fire alarm system designed for simplicity and reliability. Making it ideal for small to medium-sized premises such as schools, offices, and shops. Unlike traditional systems, the Fike Twinflex Pro uses advanced two-wire technology. Allowing detectors, call points, and sounders to operate on a single circuit. Fike’s two-wire systems have been know for their adaptability and cost-effectiveness. This makes them one of the most flexible products on the market.
Twinflex Pro2 Panels are intelligent two-wire panels that utilises a conventional type cabling format. The system is classed as Analogue non-addressable due to the architecture used within the design. Available in two, four and eight zone variants which support up to 32 Twinflex devices per circuit.
Fike Twinflex Multipoint ASD Detectors are designed to provide flexible and reliable fire detection, with advanced features that ensure rapid response to potential fire hazards. They come in a few different options, such a Multipoint Detector, a detector with sounder, and a sounder & strobe option.
The Fike Twinflex Flash Point detectors provide a dual functionality of fire detection and visual alerts, making them an essential addition to any fire protection system. Ideal for areas with high noise levels or for aiding people with hearing impairments, these devices ensure that fire alarms are both seen and responded to promptly. Coming in Low Profile, Domed and Weatherproof options.
Fike Addressable: Intelligent and Scalable Solutions
For buildings that require advanced fire protection and precise monitoring, Fike Addressable Fire Alarm Systems offer the perfect solution. These Fike Fire Products are designed to provide superior control, scalability, and detailed monitoring for larger premises. Allowing building managers and safety teams to respond quickly and effectively to potential fire threats.
Fike CIE-A-200 Addressable Fire Alarm Control Panel is a one loop panel capable of supporting up to 200 devices* with a maximum length of 2KM. The panel also provides two configurable Monitored Input
Circuits, 2 configurable Monitored Output Circuits, 2 configurable Relays, 1 Fault Relay and also a Peripheral Bus Circuit to add up to 8 Repeater Panels. The CIE-A-400 allows for the same devices and maximum loop length, but is a two loop panel.
Sita ASD Detectors are cutting-edge devices designed to provide early and reliable smoke detection in environments where traditional smoke detectors might not be as effective. These detectors are ideal for high-risk or sensitive environments. Such as data centers, archives, and clean rooms. Where early detection is crucial to prevent costly damage and downtime. The detectors come in a few options, such as with a Sounder, and sounder & strobe.
Sita Sounders allow for audible indication when the systems enters an alarm condition. The Digital communication technology to the control panel is implemented, allowing for accurate data transfer at
high transmission speeds. The Sounders come in sounder & strobe, and strobe options.
Fike Conventional: Simple and Reliable Protection
For buildings that require straightforward and cost-effective fire protection, Fike Conventional Fire Alarm Systems offer reliable, easy-to-install solutions. These systems are ideal for smaller installations such as retail stores, offices, schools, or residential complexes. Built to deliver accurate fire detection with simple, zone-based monitoring and control, ensuring full protection with minimal complexity.
In any fire emergency, the ability to quickly raise an alarm is critical for ensuring the safety of building occupants. Fike Conventional Manual Call Points are designed for this purpose, allowing individuals to manually trigger the fire alarm system in the event of a fire. By breaking the glass, occupants can instantly alert others to the danger, activating alarms and initiating an emergency response. These call points also come in weatherproof and battery operated options.
Conventional Sounders are designed to provide loud, clear audible alarms during a fire emergency. Ensuring that all occupants are alerted as quickly as possible. These sounders are a critical part of any fire alarm system. Delivering unmistakable warning signals when the fire alarm is triggered. In addition to audible alarms, Conventional Sounders with White VAD provide a visual warning. Making them an excellent solution for environments where hearing alone may not be enough.
Fike & Videplus
Whether you need a flexible solution like the Fike Twinflex, the high-tech capabilities of Fike Addressable Systems, or the straightforward reliability of Fike Conventional Systems, Videplus has the right fire protection solution for your business. Contact us today to learn more about how Fike Fire Products can enhance your building’s safety
You must be logged in to post a comment.