EUR
en EN

Tag Archives: DHCP

Apr 10

Looking for a guide on how to Enable DHCP (Dynamic Host Configuration Protocol) for Online Access? Have a look at our video to streamline your network management process!

This video is a step by step guide on how to enable DHCP. The steps are also below:

  1. Open the Dahua Toolbox and run the Config Tool. These settings can also be set locally on any recorder if not using the Config Tool
  2. Select the Recorder you wish to work on and click “Web” to open the Web Portal on Edge
  3. Login with your Username and Password
  4. Navigate to the Network Menu
  5. Open the TCP/IP Menu
  6. Click the Pencil Icon to Edit your NIC Settings
  7. Click DHCP to Enable it. Then click OK
  8. If DHCP is enabled on this screen, uncheck this box. Make sure you click Apply to save these settings

Looking for Connection to the DMSS App? Follow these steps below:

  1. For Connection to the DMSS App, click the P2P Tab
  2. Click the Enable Slider and click Apply on the bottom right
  3. Scan the QR Code marked “Mobile Client” with your phones camera for a link to download the DMSS App
  4. Scan the QR Code marked “Device SN” on the DMSS App when adding the device to your app for remote viewing
  5. Click Apply and Reboot the Recorder
  6. Navigate back to the P2P Menu when the Recorder has rebooted, to check its status is now Online
Aug 15

How to setup Hik-Connect
Hik-Connect is a new platform from Hikvision designed to make setting up remote access quicker and easier than using a DDNS or static IP. With this setup guide, you will no longer need any port forwarding. It’s as easy as registering your customer an account, then scanning the QR code on the recorder.

Before you start you’ll need your customer’s email address or mobile number, you’ll need access to their chosen email or phone to receive a verification code, and you’ll need access to the NVR or DVR.

Setting up the recorder
1. First, gain access to the DVR/NVR
2. Right click and navigate to Menu>Configuration>Network>Platform Access, and tick the Enable box
3. You’ll now be asked to read and accept the terms and conditions
4. When prompted, set a Verification code.  This can be any alpha-numeric code between 6 and 12 characters
5. The Status will now show Online.  If not, please see troubleshooting at the end of this guide.

Setting up the Hik-connect app
6. From yours or the customers phone, download the Hik-Connect App from the App store or Google Play
7. Once installed, open the app and you’ll be presented with the login screen, tap on Register
8. Follow the on screen instructions to setup a Hik-connect account. You will need to verify the account by using a valid email address or phone number

10. You have now registered the Hik-Connect account. Make a note of the username and password. These login details will need to re-enter if their phone is reset, the app is reinstalled, or they want to use Hik-connect on another device.

Adding the recorder to Hik-connect
11. You’ll now be taken into the app and prompted to add a device. Click the + symbol to add a device and the phones camera will open.
12. Now on the recorder navigate to the Platform Access page, right click and go to Menu>Configuration>Network>Platform Access.
13. Scan the QR code with the phones camera.
14. If prompted, enter the verification code you created and skip the port settings
15. The cameras connected to the recorder will now be visible on the mobile Hik-Connect app.  Select the camera you want to view and click Start Live View

 

Troubleshooting

I haven’t received a verification code: Please check your spam folders and email filters. If the problem persists consider registering with a different email or mobile number.

Hik-Connect status is offline: Ensure the enable box is ticked on the ‘Platform Access’ page and that your unit has a working connection to the internet.  Check the network settings are correct for the network you are connected to.

I get a message saying the device is already registered: Devices can only be added to a single account. To view the device on multiple phones or tablets, you just need to install Hik-Connect app, and then log in with the details of the Hik-Connect account the device is registered to.

I don’t have an option for platform access: Please contact your supplier/installer with your device’s serial number and current firmware version as the unit may need a firmware update. This information can be found in the ‘Maintenance’ menu.

X