EUR
en EN
0

Tag Archives: Microsoft Edge

Apr 18

Enable Internet Explorer Mode on Edge

| | Dahua YouTube Videos| , , , , , , , , ,

Wanting a step by step guide on how to enable Internet Explorer mode on Edge for Dahua devices web portal? Have a look at this blog post, which shows exactly how enable Edge for configuration using the Dahua Config Tool.

This will show you how to enable Internet Explorer mode on Microsoft Edge for configuring Dahua Devices when using the Dahua Config Tool. You can still use browsers such as Firefox or Google Chrome, but you may find they have limited functionality such as some menus don’t display correctly or there is no live video feed of a camera. This is because of a plugin that is unavailable to these browsers. This could change in the future, but for now if you are going to HTTP into a device we recommend using Internet Explorer or Edge in IE Mode!

To Enable Internet Explorer Mode on Edge, please follow these steps:

  1. Open Microsoft Edge
  2. Click the three dots in the top right hand corner of the browser
  3. Navigate to “Settings”, then left click to open
  4. Find the “Default Browser” tab and click to open the options
  5. The drop down menu will likely be set to “Default” or “Don’t Allow”. Change this to “Allow”
  6. Close Edge to apply these settings

Now whenever you are logging into a device via the Config Tool, the web portal will open in Internet Explorer Mode, allowing full functionality.

Wanting to see more tutorials in relation to Dahua products? Click here to find more helpful information.

Apr 10

Enable DHCP For Online Access

| | Dahua YouTube Videos| , , , , , , , , ,

Looking for a guide on how to Enable DHCP (Dynamic Host Configuration Protocol) for Online Access? Have a look at our video to streamline your network management process!

This video is a step by step guide on how to enable DHCP. The steps are also below:

  1. Open the Dahua Toolbox and run the Config Tool. These settings can also be set locally on any recorder if not using the Config Tool
  2. Select the Recorder you wish to work on and click “Web” to open the Web Portal on Edge
  3. Login with your Username and Password
  4. Navigate to the Network Menu
  5. Open the TCP/IP Menu
  6. Click the Pencil Icon to Edit your NIC Settings
  7. Click DHCP to Enable it. Then click OK
  8. If DHCP is enabled on this screen, uncheck this box. Make sure you click Apply to save these settings

Looking for Connection to the DMSS App? Follow these steps below:

  1. For Connection to the DMSS App, click the P2P Tab
  2. Click the Enable Slider and click Apply on the bottom right
  3. Scan the QR Code marked “Mobile Client” with your phones camera for a link to download the DMSS App
  4. Scan the QR Code marked “Device SN” on the DMSS App when adding the device to your app for remote viewing
  5. Click Apply and Reboot the Recorder
  6. Navigate back to the P2P Menu when the Recorder has rebooted, to check its status is now Online

To view more blog post from Videplus, please click here.