EUR
en EN

Tag Archives: network

Jan 09
WiFi Extender

Tired of Wi-Fi deadspots?

We all know how frustrating it is to run out of Wi-Fi with wireless devices, so you can’t browse the internet, stream videos, send/receive e-mails… on your iPad®, Android® tablet, smartphone, TV, media player, etc. Now you can turn any power socket into a Wi-Fi hotspot by extending your Router’s Wi-Fi range by up to 2x the distance, all in a compact, portable and easy-to-use device.

Next Generation AC Wireless

Using the latest 802.11ac technology to enable super fast, lag-free data transfer speeds of up to 750Mbps with AC compatible devices.

Instant Set up

By pressing the WPS button on the TM-750 AC and your Router, they will automatically connect to each other and share the same Wi-Fi name and password.

Smart Wi-Fi Positioning

With the intelligent signal identifier, you can quickly find the best location to place the TM-750 AC to get the best Wi-Fi coverage around your property.

Dual Band Wireless

Most range extenders only work on the congested and slow 2.4Ghz band which suffers interference from microwaves, Bluetooth, wireless devices, ovens, cordless phones, etc, reducing and even disrupting the wireless signal.

5Ghz has more bandwidth and less interference providing you with a faster signal and better connection without interruption.

Built in QoS traffic prioritisation technology is designed to deliver your time-sensitive Internet traffic efficiently so you can enjoy smooth video, music streaming, and gaming performance.

The advanced security solutions of 128-bit AES, WEP, WPA, WPA2 & EAP encryptions are included for that extra peace-of-mind.

Access Point

Out of your Router’s Wi-Fi range? You can create a dual band Wi-Fi hotspot by connecting an Ethernet cable from your Router or Switch directly to the TM-750 AC.

Ethernet Bridge

It can also act as a wireless ethernet bridge if you wish to convert a wireless signal to an ethernet cable, so that an ethernet device can connect to your wireless network.

Secure

The advanced security solutions of 128-bit AES, WEP, WPA, WPA2 & EAP encryptions are included for that extra peace-of-mind.

*750Mbps is the maximum theoretical Powerline data rate. Actual throughput will vary depending on environment.

Dec 19

What you’ll require

Setup of a basic wireless bridge for a CCTV system

You need two NanoBeams
You need a laptop/computer with an ethernet port (to connect the LAN cable)
You need two patch cables (one goes from NanoBeam to PoE injector port labled “PoE” and the other goes from PoE injector port labled “LAN” to computer)

We assume the IP address of the device that connects to the internet to be “192.168.0.1” with a subnet mask of “255.255.255.0”.
This device is normally provided by your internet service provider.
It is called a router or modem and is a “gateway”.

Place both NanoBeams beside laptop/computer.

SETTING UP DEVICE A

Connect first NanoBeam (A) to the computers ethernet port with a patch cable from it’s PoE injector device port labled “LAN”

Change the IP address of the computers ethernet port to “192.168.1.1” and subnetmask “255.255.255.0”
open a web browser and go to “http://192.168.1.20”
Enter as follows: username: admin password: ubnt and press enter

Click on the “wireless” tab and the following for each;
Wireless Mode: Access Point
WDS: no enable
SSID: A (This can be whatever you like eg:  Videplus Access Point)
Channel width: 20 Mhz
Channel Shifting: Disable
Frequency, MHz: auto
Frequency List, MHz: no enable
Auto Adjust EIRP Limit: enable
Security: WPA-AES
WPA Authentication: PSK
WPA Preshared Key: 123456789

Click “change” at the bottom right and then “apply” at the top.

Wait a few seconds for device to reboot.
You may have to log back in with the username:ubnt password:ubnt

Next click on “Network” tab and enter for each:
Network Mode: Bridge
Disable Network: None
Managment Interface: BRIDGE0
Managment IP Address: Static
IP address: 192.168.0.100
Netmask: 255.255.255.0
Gateway: 192.168.0.1
Primary DNS IP: 8.8.4.4
Secondary DNS IP:

Click “change” bottom right and then “apply” at the top.

Wait 30 seconds or so for device to reboot.
Now unplug the patch cable from the PoE injector devices port labled “LAN”.
Check that the lights on the radio/device (A) are still on and that the device is powered.

SETTING UP DEVICE B

Connect second NanoBeam (B) to the computers ethernet port with the patch cable from the SECOND PoE injector device port labled “LAN”
open your web browser and go to “http://192.168.1.20”
enter username: ubnt and password: ubnt and press enter

Click on “wireless” tab and enter for each:
Wireless Mode: Station
SSID: click on “Select” and wait for device “B” to scan for device “A” which has SSID name “A” as configured in above step.
In pop-up windows select the device “A” and then select “Lock to AP”
Channel Width: 20 MHz
Channel Shifting: Disable
Frequency, MHz: auto
Frequency List, MHz: no enable
Auto Adjust EIRP Limit: enable
Security: WPA-AES
WPA Authentication: PSK
WPA Preshared Key: 123456789

Click “change” bottom right and then “apply” at the top.
Wait a few seconds for device to reboot.
Again you may have to log back in with username:ubnt and password:ubnt

Next click on “Network” tab and enter for each:
Network Mode: Bridge
Disable Network: None
Managment Interface: BRIDGE0
Managment IP Address: Static
IP address: 192.168.0.101
Netmask: 255.255.255.0
Gateway: 192.168.0.1
Primary DNS IP: 8.8.4.4
Secondary DNS IP:

Click “change” bottom right and then “apply” at the top.
Wait a few seconds for device to reboot.

Both devices/radios are now configured and can be moved to permanent location.
The ethernet port of the computer can now be changed back to IP address “192.168.0.2” and subnet mask “255.255.255.0” or DHCP.

You now have a wireless bridge set up.

May 09

OCULi Wireless PIR Camera

OCULi is a product range of battery powered wireless, PIR motion sensors which have integrated colour/monochrome cameras and infrared illuminators. These products provide rapid video verification of alarm events using the mobile phone 3G network. A dedicated cloud server and web portal provides a full monitoring system as well as an easy way to set up and control the detectors. Alarms and alerts are sent to the OCULi mobile phone app as Push Notification as an alternative means of monitoring.

System Overview

OCULi uses the mobile phone 3G network and can be sited anywhere there is a network signal available. Simply sign up to SIM usage on a rolling monthly contract and you are ready to go. (SIM price includes the use of the cloud server). Images are streamed over 3G giving exceptional speed and quality of delivery. Connection time to the network using our roaming SIM is fast and non network specific so the strongest signal will always be used. All video & data is stored on the SD card and cloud server until it is deleted by the user.

Superior VGA 640×480 colour video starts filming in just a few milliseconds after detection ensuring that events are not missed. Unrivalled monochrome night-time clarity is achieved using powerful IR LED lighting.

PIR detection range is 15 metres x 90° using a Quad Pyro Sensor and falls well within the camera’s field of view of 135° to ensure detected movements remain in view. Bluetooth® facilitates easy set up using the mobile phone app to determine signal strength, camera view and PIR detection coverage. Sensitivity, pulse counting and AND gating are all configurable using the App or web portal.

Each OCULi detector is programmable to automatically set and un-set up to 3 times per day on a 7 day timer.

On site Arm/Dis-Arm can over-ride the automatic schedule by using the OCULi phone App.

Quad pyro technology minimises false alarms and ensures superior detection performance. OCULi is fully tamper protected with IR anti-masking, 3 axis inertia sensing and enclosure tampers.

TimeLine video® feature ensures that the product is working correctly and provides an extra level of surveillance.

PRODUCT IMAGES

OCULi PIR Camera Side ProfileOCULi PIR Camera

FEATURES AND SPECIFICATIONS

BASIC INFORMATION
Power requirements 2 x Lithium ER34615M cells (not supplied)
External input voltage 12 volts DC
Mobile data 3G network to dedicated cloud server
Local wireless network Long Range Bluetooth®
Battery life (estimated) 1 year + (dependent on usage)
Micro SD card specification 8gb (supplied)
SIM card specification Micro SIM
Weight 850g
Operating temperature range -20°C to +60°C
Mounting height 2.5 – 4 metres
Weather rating IP66
Warranty 2 years
DETECTOR INFORMATION
Motion detector type Passive infrared
Sensor type Quad Pyro
Lens type Fresnal
Detection range 15 metres x 90° (see diagram)
CAMERA INFORMATION
Camera sensitivity 6 volts per lux per second
Camera resolution 640×480 VGA
Colour/Monochrome
Camera lens Wide angle 135°
Video sequence 2 frames per second over 7 seconds (configurable)
LIGHTING INFORMATION
IR LED IR Frequency 850nm
IR Power 1 amp
IR Distance 15 metres
TRANSMITTED EVENT MESSAGES
Alarm output
Shock sensor
Tamper output
Anti-masking output
3 Axis orientation sensor
LOW battery
Signal strength
TimeLine Video®
Heart beat

DETECTION PATTERNS

X