Tag Archives: remote

Jan 24

Setting up a CCTV system in a remote location, so you can view cows which are cavling for example, couldn’t be easier. When a barn is located a few kilometres away, and CCTV is required, setting up a wireless bridge is a simple solution which will save you time and money if it is a site that requires checks regularly.

Using a pair of our wireless access points to create a wireless bridge is as simple as the flick of a switch to pair the two devices, once the CCTV cameras are in place at the remote location and the recording unit is set up locally in your home or business.

This is just one example of where as wireless bridge can be utilized to save time and money for somewhere that may need constant attention or regular attention to make sure there are no problems on site.

For further information on this application feel free to contact our experienced sales team on 02890 329480

Feb 02

Upgrading a NVR’s firmware from the EZ View App could not be simpler!  First open your EZ View App, tap the main menu, tap on the devices tab, refresh the list of devices by scrolling your finger down the screen, and a red dot will appear on any device that has a firmware upgrade available.  Tap on that device, tap on P2P Upgrade and tap Start Upgrade!

The video below shows how quick and simple it is!

Remotely upgrading a NVR’s firmware saves an engineer from having to travel to sites and upgrade firmware via USB!

 

Jan 26

TP-Link’s Outdoor CPE access point is dedicated to reliable solutions for outdoor wireless networking applications.  With its centralized management application, it is flexible and ideal for point-to-point and point-to-multipoint applications.  Perfect for when cameras cannot be cabled back to a NVR unit, such as farms yards, remote outhouses etc. over long distances (15km+) point-to-point.

 

  • Built-in 13dBi 2×2 dual-polarized directional MIMO antenna
  • Adjustable transmission power from 0 to 27dBm/500mw
  • System-level optimizations for more than 15km long range wireless transmission
  • TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
  • Centralized Management System – Pharos Control
  • AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
  • Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

The video tutorial below will show you how to successfully set up an Access Point and Client using the CPE Series.

 

Typical Applications:

Long-distance wireless connection by using two CPEs to build a long-distance wireless connection.  Shown in Fig.1.

Fig.1

Large-area wireless coverage using base station combined with sector antenna as the access point at the central station, and several CPEs as clients to build and a point to multi-point coverage.  Shown in Fig.2.

Fig.2.

 

 

X